Water conservation is critical to continued survival but only about 1% of the water on the earth’s surface is available for human consumption. Water heating was found to be the household’s second largest expense, after heating and cooling.
According to 1 Stop Mechanical Inc., plumbing issues like leaky valves cannot be ignored because of the unexpected and unnecessary costs that they cause. Water heating waste can also result in massive amounts of wasted water and extra monetary costs.
Water Wastage Statistics
A report by the U.S. Environmental Protection Agency finds that leaks from an average household accounts for nearly 10,000 gallons of water wasted every year. Common types of leaks in the home include dripping faucets and showerheads, worn toilet flappers, and other leaking valves. Homeowners can save up to 10% on water bills if they fix leaks that are easily reparable. Water usage increases further during cold winter months like January and February.
Simple Ways to Reduce Hot Water Consumption
You can make simple habit changes and use cost-free methods to reduce water heating waste.
Hot water is not always necessary for doing laundry, as rinsing in cool or warm water can produce the same results as hot water. Essentially, it gets the same job done while reducing water heating energy use.
It isn’t necessary to rinse dishes before putting them in the dishwasher because this only means using hot water twice to wash the same dish. You can also save more water by running the dishwasher only when the load is full. Another cost-free way to save water and energy is to control the water temperature by lowering the maximum possible temperature of the water heater.
Leaky faucets, showerheads, and pipes can result in unexpected expenses. A steady leak of one drip per second can already force a household to waste hundreds of gallons of water a year.
Check for leaky faucets in the kitchen and in the bathroom of your home and office on a regular basis. Most leaks are easy to spot because they will present as a puddle of water surrounding a faucet that is turned off. You can also wrap a towel around the faucet or hang a plastic bag under the tap to check for a leak. Other signs include a musty smell or mildew and moisture on a wall. Leaks behind walls are harder to detect, more difficult to repair, and will likely require professional plumbing services.
Leaks need to be fixed immediately upon detection to ensure there are no extra costs and that they are not overlooked or forgotten.
Some leaks can be fixed with a replacement of the faucet’s washers, rings, or valves. This is a simple and inexpensive way for conserving water. Reduced water consumption can save on energy for pumping equipment and reduce the overall utility bill. Before carrying out repairs, ensure that the valve’s water supply is switched off to prevent you from getting wet and increasing water wastage.
Leaky valves and high hot water consumption can mean the unnecessary increase of utility bills. These types of water wastage can be easily corrected with a simple change in habits or by employing cost-effective methods.